Dronetag DRI
The HERCULES X4 Drone uses a Drontag DRI module to comply with the Broadcast Remote Identification regulation for EU.
The Drontag DRI module transmits position and identification data according to the standards outlined in:
- prEN 4709-002 for the EU
- ASTM F3411 for the US
| PARAMETER | VALUE |
|---|---|
| Short-range radio | Bluetooth 2.4 GHz |
| Bluetooth output power | 8dbm |
| Remote ID technology | Bluetooth 4.0 Legacy + 5.0 Long Range |
| Sensors | None, data read from flight controller |
| Indicators | RGB LED to show the state |
| Antenna | Variant with internal or external one |
| Antenna Connectors | Optionally 1× U.FL (IPEX compatible) |
| Communication Connectors | 2× JST GH 6-pin (1.25 mm pitch) |
| Communication Protocol | UART (3.3 – 5V tolerant) |
| Supported Message Protocol | MAVlink 2 |
| Input voltage | 3.3 – 17V |
| Input voltage regulator | Low-noise buck converter |
| Average current consumption | 3 mA |
| Maximum current consumption | 10 mA |
| Mounting mechanism | M2 holes or double-sided tape |
| Operating temperature | -40°C to +85°C (-40°F to 185°F) |
| Dimensions | 22.5 × 16 × 5 mm (0.89 x 0.62 x 0.19 in) |
| Weight | with JST connectors 1.5 grams (0.56 oz) |
| Weight | without JST connectors 0.5 grams (0,017 oz) |
| Remote ID Standards | ASD-STAN EN 4709-002 & ASTM F3411-22 |
| Certifications | Uses FCC/CE approved radio module |